College of Engineering

Research Output

Filter
Conference contribution
1982

DROP COLLISIONS WITH LIQUID FLOWING FILMS ON SIMULATED LWR CONTROL ROD GUIDE TUBES.

Alexander, D. R. & Rockenbach, F. A., 1982, Proceedings of the International Centre for Heat and Mass Transfer. Hemisphere Publ Corp, p. 483 1 p. (Proceedings of the International Centre for Heat and Mass Transfer).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

NATURAL CONVECTION IN A SPHERICAL ANNULUS FILLED WITH HEAT GENERATING FLUID.

Nelsen, J., Douglass, R. & Alexander, D., 1982, Heat Transfer, Proceedings of the International Heat Transfer Conference. Hemisphere Publ Corp, p. 171-176 6 p. (Heat Transfer, Proceedings of the International Heat Transfer Conference).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

8 Scopus citations
1983

BLACK NICKEL COATED SURFACE FOR FLAT-PLATE SOLAR COLLECTORS.

Kunc, S., Demirel, Y., Uysal, Y. & Eker, A., 1983, Unknown Host Publication Title. Alawi, H., Al-Jassar, A., Al-Juwayhel, F. & Sayigh, A. A. M. (eds.). Pergamon Press, p. 125-128 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

ELECTRICAL PROPERTIES OF SbCl//5, ICl, HNO//3, and Br//2 INTERCALATED PITCH BASED CARBON FIBERS.

Natarajan, V. & Woollam, J. A., 1983, Materials Research Society Symposia Proceedings. North-Holland, p. 45-50 6 p. (Materials Research Society Symposia Proceedings; vol. 20).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Scopus citations

PULSE CURRENT SIGNAL AS A SENSOR FOR ON-LINE COMPUTER CONTROL OF EDM.

Rajurkar, K. P., Pandit, S. M. & Wittig, W. H., 1983, Manufacturing Engineering Transactions. North American Manufacturing Research Inst of SME, 00001400, p. 379-385 7 p. (Manufacturing Engineering Transactions).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Scopus citations
1984

EXPERIMENTAL AND THEORETICAL INVESTIGATION OF EDM DEBRIS.

Rajurkar, K. P., Pandit, S. M. & Venkatapathy, B. R., 1984, Manufacturing Engineering Transactions. North American Manufacturing Research Inst of SME, p. 241-246 6 p. (Manufacturing Engineering Transactions).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Scopus citations

SIMULATION MODEL FOR PEACETIME COMBAT AIRCRAFT BUILDUP.

Maussavi, S. M., Drew, D. R., Tran, T. K. & Young, S. H., 1984, Modeling and Simulation, Proceedings of the Annual Pittsburgh Conference. ISA, p. 841-846 6 p. (Modeling and Simulation, Proceedings of the Annual Pittsburgh Conference).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

STOCHASTIC MODELING OF EDM WITH A VIEW TO OFF-LINE OPTIMIZATION.

Pandit, S. M., Venkatapathy, B. & Rajurkar, K. P., 1984, Unknown Host Publication Title. p. 389-392 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1985

ADAPTIVE CONTROL OF EDM - TECHNOLOGY AND RESEARCH.

Rajurkar, K. P. & Pandit, S. M., 1985, Manufacturing Engineering Transactions. SME, North American Manufacturing Research Inst, p. 8-14 7 p. (Manufacturing Engineering Transactions).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Scopus citations

Analysis of differential PCM

Sayood, K., 1985, Conference Record - 19th Asilomar Conference on Circuits, Systems and Computers, ACSSC 1985. Kirk, D. E. (ed.). IEEE Computer Society, p. 218-222 5 p. 671453. (Conference Record - Asilomar Conference on Signals, Systems and Computers).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Scopus citations

SLIDING SCALE QUANTIZATION.

Sayood, K. & Borkenhagen, J. C., 1985, Conference Record - Asilomar Conference on Circuits, Systems & Computers. Kirk, D. E. (ed.). IEEE, p. 243-246 4 p. (Conference Record - Asilomar Conference on Circuits, Systems & Computers).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

SURFACE DAMAGE AND SHOCK WAVES IN EDM.

Rajurkar, K. P., 1985, Manufacturing Engineering Transactions. SME North American Manufacturing Research Inst, p. 379-385 7 p. (Manufacturing Engineering Transactions).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

10 Scopus citations
1986

DATA COMPRESSION TECHNIQUE FOR VISION SYSTEMS.

Rajurkar, K. P. & Roste, M. C., 1986, Unknown Host Publication Title. Machine Vision Assoc of SME, p. 4. 109-4. 120

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1987

STUDY OF ION IMPLANTED COPPER LASER MIRRORS BY SPECTROSCOPIC ELLIPSOMETRY.

Snyder, P. G., Massengale, A., Memarzadeh, K., Woollam, J. A., Ingram, D. C. & Pronko, P. P., 1987, Materials Research Society Symposia Proceedings. Thompson, M. O., Picraux, S. T. & Williams, J. S. (eds.). Materials Research Soc, p. 535-540 6 p. (Materials Research Society Symposia Proceedings; vol. 74).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Scopus citations
1989

Ectopic expression of interferon gamma and class II MHC induce the development of insulin-dependent diabetes mellitus in transgenic mice

Sarvetnick, N., Liggitt, D. & Stewart, T. A., 1989, Genes and gene products in the development of diabetes mellitus: proceedings of the 3rd Nordisk Insulin Symposium 'Genes ane gene products in the development of diabetes mellitus'. ICS866. Nerup, J., Mandrup-Poulsen, T., Hokfelt, B., Nerup, J., Mandrup-Poulsen, T. & Hokfelt, B. (eds.). Elsevier Science Publishers B.V., p. 127-139 13 p. (Genes and gene products in the development of diabetes mellitus: proceedings of the 3rd Nordisk Insulin Symposium 'Genes ane gene products in the development of diabetes mellitus'. ICS866).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1990

An edge preserving differential image coding scheme

Rost, M. C. & Sayood, K., 1990, Conference Proceedings - Annual Phoenix Conference. Publ by IEEE, p. 280-286 7 p. (Conference Proceedings - Annual Phoenix Conference).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Information processing in a mail order filling company. Case study 1

Bishu, R. R., Donohue, B., Murphy, P. & Hoffman, R. O., 1990, Proc 1990 Int Ind Eng. Anon (ed.). Publ by IIE, p. 174-179 6 p. (International Industrial Engineering Conference Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Investigation of surface characteristics in electrochemical grinding

Rajurkar, K. P. & Bhatia, S. K., 1990, Proc Manuf Int 90 Part 4 Adv Mater Autom. Publ by American Soc of Mechanical Engineers (ASME), p. 119-124 6 p. (Proc Manuf Int 90 Part 4 Adv Mater Autom).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Scopus citations

Pulsed laser deposition of tl-ca-ba-cu-o films

Ianno, N. J., Liou, S. H., Woollam, J. A., Thompson, D. & Johs, B., 1990, Proceedings of SPIE - The International Society for Optical Engineering. Bhasin, K. B. & Heinen, V. O. (eds.). Publ by Int Soc for Optical Engineering, p. 24-37 14 p. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 1292).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1991

Comparison of one-phase and two-phase anaerobic digestion processes in characteristics of substrate degradation and bacterial population levels

Zhang, T. C. & Noike, T., 1991, Water Science and Technology. 7-9 ed. Vol. 23. p. 1157-1166 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

50 Scopus citations

Electromagnetic field calculations for a tightly focused laser beam incident upon a microdroplet: applications to nonlinear optics

Barton, J. P. & Alexander, D. R., 1991, Proceedings of SPIE - The International Society for Optical Engineering. Publ by Int Soc for Optical Engineering, p. 64-77 14 p. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 1497).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Scopus citations

Modelling distributed real-time route guidance strategies in a traffic network that exhibits the Braess paradox

Rilett, L. R. & van Aerde, M. W., 1991, Proceedings - Society of Automotive Engineers. P-253 pt 2 ed. Publ by SAE, p. 577-587 11 p. (Proceedings - Society of Automotive Engineers; no. P-253 pt 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Scopus citations

Nonlinear laser interactions with saltwater aerosols

Alexander, D. R., Poulain, D. E., Schaub, S. A. & Barton, J. P., 1991, Proceedings of SPIE - The International Society for Optical Engineering. Publ by Int Soc for Optical Engineering, p. 90-97 8 p. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 1497).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

On multilevel trellis MPSK codes

Wu, J., Costello, D. J. & Perez, L. C., 1991, Proceedings - 1991 IEEE International Symposium on Information Theory, ISIT 1991. Institute of Electrical and Electronics Engineers Inc., p. 145 1 p. 695201. (IEEE International Symposium on Information Theory - Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Optimization of quadrilayer structures for various magneto-optical recording materials

He, P., McGahan, W. A. & Woollam, J. A., 1991, Proceedings of SPIE - The International Society for Optical Engineering. Publ by Int Soc for Optical Engineering, p. 401-411 11 p. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 1499).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

8 Scopus citations

Oxygen mass transfer to flowing ground water using oxygen microbubbles

Michelsen, D. L., Lotfi, M., Velander, W. H., Mann, J. W. & Khalichi, P., 1991, Air-Water Mass Transfer. Publ by ASCE, p. 765-777 13 p. (Air-Water Mass Transfer).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

Prediction trees and lossless image compression

Memon, N. D., Magliveras, S. S. & Sayood, K., 1991, Data Compression Conference 1991. Institute of Electrical and Electronics Engineers Inc., p. 83-92 10 p. 213375. (Data Compression Conference Proceedings; vol. 1991-April).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Scopus citations

Recursive indexing and its application

Sayood, K. & Na, S., 1991, Proceedings - 1991 IEEE International Symposium on Information Theory, ISIT 1991. Institute of Electrical and Electronics Engineers Inc., p. 28 1 p. 695081. (IEEE International Symposium on Information Theory - Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Risk-cost analysis under uncertainty for dredged material management

Stansbury, J. & Bogardi, I., 1991, Water Resources Planning and Management and Urban Water Resources. Anderson, J. L. (ed.). Publ by ASCE, p. 308-313 6 p. (Water Resources Planning and Management and Urban Water Resources).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Routing based on anticipated travel times

Rilett, L. & Van Aerde, M., 1991, Proc 2 Int Conf Appl Adv Technol Transp Eng. Stephanedes, Y. J. & Sinha, K. C. (eds.). Publ by ASCE, p. 183-187 5 p. (Proc 2 Int Conf Appl Adv Technol Transp Eng).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Scopus citations

Shear stress from hot-film sensors in unsteady gas flow - numerical experiments

Cole, K. D., 1991, Heat Transfer in Unsteady Flows. Publ by ASME, p. 27-34 8 p. (American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD; vol. 158).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Simulating the TravTek route guidance logic using the integration traffic model

Rilett, L. R., Van Aerde, M., Mackinnon, G. & Krage, M., 1991, Proceedings - Society of Automotive Engineers. P-253 pt 2 ed. Publ by SAE, p. 775-787 13 p. (Proceedings - Society of Automotive Engineers; no. P-253 pt 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

8 Scopus citations
1992

Complete measurement of Kerr parameters by using rotating-analyzer magneto-optic spectroscopy

Chen, L. Y., Feng, X. W., Tian, Y. S., Su, Y., Ma, H. Z., Qian, Y. H., Shen, D. F. & Woollam, J. A., 1992, Proceedings of SPIE - The International Society for Optical Engineering. Publ by Int Soc for Optical Engineering, p. 307-315 9 p. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 1746).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

17 Scopus citations

Discrimination between road and soil surfaces using CO2 laser reflectances

Narayanan, R. M., vonRentzell, E. D. & Alexander, D. R., 1992, Proceedings of SPIE - The International Society for Optical Engineering. Publ by Society of Photo-Optical Instrumentation Engineers, p. 370-380 11 p. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 1687).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Scopus citations

Error extension in decoding of line signal

Wysocki, T., 1992, TENCON 1992 - Technology Enabling Tomorrow: Computers, Communications and Automation towards the 21st Century - 1992 IEEE Region 10 International Conference. Institute of Electrical and Electronics Engineers Inc., p. 908-912 5 p. 271838. (IEEE Region 10 Annual International Conference, Proceedings/TENCON).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

In-situ and ex-situ ellipsometric characterization for semiconductor technology (Invited Paper)

Woollam, J. A., Snyder, P. G., Yao, H. & Johs, B. D., 1992, Proceedings of SPIE - The International Society for Optical Engineering. Publ by Int Soc for Optical Engineering, p. 246-257 12 p. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 1678).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

11 Scopus citations

Methodology for evaluating dredged material alternatives using risk-cost analysis under uncertainty

Stansbury, J., Bogardi, I. & Kelly, W. E., 1992, Risk-Based Decision Making in Water Resources V, Proceedings of the Conference. Publ by ASCE, p. 236-259 24 p. (Risk-Based Decision Making in Water Resources V, Proceedings of the Conference).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Monitoring sparking frequency and predicting wire breakage in WEDM

Wang, W. M. & Rajurkar, K. P., 1992, Sensors and Signal Processing for Manufacturing. Publ by ASME, p. 49-64 16 p. (American Society of Mechanical Engineers, Production Engineering Division (Publication) PED; vol. 55).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

15 Scopus citations

New 7B8B code for optical transmission

Slominski, M. M. & Wysocki, T., 1992, 6th Mediterranean Electrotechnical Conference. Publ by IEEE, p. 618-620 3 p. (6th Mediterranean Electrotechnical Conference).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Role of nontraditional manufacturing processes in future manufacturing industries

Rajurkar, K. P., Ross, R. F., Wei, B., Kozak, J. & Williams, R. E., 1992, Proc Manuf Int MI 92. Publ by ASME, p. 23-37 15 p. (Proc Manuf Int MI 92).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

12 Scopus citations

Software and database D-COMP for composite properties calculation

Dzenis, Y. A., 1992, Proceedings of the American Society for Composites. Publ by Technomic Publ Co Inc, p. 266-275 10 p. (Proceedings of the American Society for Composites).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Theory of multilayers heated by laser absorption

Cole, K. D. & McGahan, W. A., 1992, Micromechanical Systems. Publ by ASME, p. 267-282 16 p. (American Society of Mechanical Engineers, Dynamic Systems and Control Division (Publication) DSC; vol. 40).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Scopus citations
1993

Compression of color-mapped images

Hadenfeldt, A. C. & Sayood, K., 1993, Proceedings of the 1993 IEEE International Conference on Communications. Publ by IEEE, p. 537-541 5 p. (Proceedings of the 1993 IEEE International Conference on Communications).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Evolution of material symmetry in the elastic response of a fully strain space theory of plasticity

Negahban, M. & Wineman, A. S., 1993, Anisotropy and Inhomogeneity in Elasticity and Plasticity. Hyer, M. W. (ed.). Publ by ASME, p. 19-23 5 p. (American Society of Mechanical Engineers, Applied Mechanics Division, AMD; vol. 158).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Scopus citations

In situ studies of electron cyclotron resonance plasma etching of semiconductors by spectroscopic ellipsometry

Nafis, S., Ianno, N. J., Snyder, P. G., Woollam, J. A. & Blaine, J., 1993, Materials Research Society Symposium Proceedings. Publ by Materials Research Society, p. 819-824 6 p. (Materials Research Society Symposium Proceedings; vol. 279).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Joint source/channel coder design

Sayood, K., Liu, F. & Gibson, J. D., 1993, IEEE International Conference on Communications. Publ by IEEE, p. 727-731 5 p. (IEEE International Conference on Communications).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Scopus citations

Laser assisted seeding for electroless plating on insulators

Schrott, A. G., Braren, B., O'Sullivan, E. J. M. & Saraf, R. F., 1993, Materials Research Society Symposium Proceedings. Publ by Materials Research Society, p. 197-208 12 p. (Materials Research Society Symposium Proceedings; vol. 285).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Laser heating of substrate by multi-beam irradiation

Lu, Y. F., 1993, Materials Research Society Symposium Proceedings. Publ by Materials Research Society, p. 705-710 6 p. (Materials Research Society Symposium Proceedings; vol. 279).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Material removal in WEDM of PCD blanks

Kozak, J., Rajurkar, K. P. & Wang, S. Z., 1993, Manufacturing Science and Engineering. Ehmann, K. F. (ed.). Publ by ASME, p. 823-833 11 p. (American Society of Mechanical Engineers, Production Engineering Division (Publication) PED; vol. 64).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Mechanical compatibility of deposited films on a hard substrate

Luo, Y. F. & Rajurkar, K. P., 1993, Manufacturing Aspects in Electronic Packaging. Ehmann, K. F. (ed.). Publ by ASME, p. 93-104 12 p. (American Society of Mechanical Engineers, Production Engineering Division (Publication) PED; vol. 65).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations