Mechanical & Materials Engineering

Research Output

2003

Measurements of the level of surgical expertise using flight path analysis from da Vinci™ robotic surgical system

Verner, L., Oleynikov, D., Holtmann, S., Haider, H. & Zhukov, L., 2003, Medicine Meets Virtual Reality 11 - NextMed: Health Horizon. IOS Press, p. 373-378 6 p. (Studies in Health Technology and Informatics; vol. 94).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

31 Scopus citations

Modelling and simulation of micro EDM process

Yu, Z. Y., Kozak, J. & Rajurkar, K. P., 2003, In : CIRP Annals - Manufacturing Technology. 52, 1, p. 143-146 4 p.

Research output: Contribution to journalArticle

72 Scopus citations

Moving screw dislocations in piezoelectric bimaterials

Wu, X. F., Dzenis, Y. A. & Zou, W. S., Jul 2003, In : Physica Status Solidi (B) Basic Research. 238, 1, p. 120-126 7 p.

Research output: Contribution to journalArticle

8 Scopus citations

New alternatives in the management of gastroesophageal reflux disease

Oleynikov, D. & Oelschlager, B., Aug 2003, In : American journal of surgery. 186, 2, p. 106-111 6 p.

Research output: Contribution to journalArticle

20 Scopus citations

Nonlinear Vibrations in Contact Atomic Force Microscopy

Turner, J. A., 2003, p. 1821-1830. 10 p.

Research output: Contribution to conferencePaper

6 Scopus citations

Perturbation theory for degenerate acoustic eigenmodes

Kosinski, J. A., Pastore, R. A., Yang, J., Yang, X. & Turner, J. A., 2003, In : Proceedings of the Annual IEEE International Frequency Control Symposium. p. 734-741 8 p.

Research output: Contribution to journalConference article

7 Scopus citations

Scattering of elastic waves in damaged media

Yang, L. & Turner, J. A., Jun 1 2003, In : Journal of the Acoustical Society of America. 113, 6, p. 2992-3000 9 p.

Research output: Contribution to journalArticle

10 Scopus citations

Screw dislocation interacting with interfacial and interface cracks in piezoelectric bimaterials

Wu, X. F., Cohn, S. & Dzenis, Y. A., Apr 2003, In : International Journal of Engineering Science. 41, 7, p. 667-682 16 p.

Research output: Contribution to journalArticle

29 Scopus citations

Screw dislocation interacting with twin interfacial edge cracks between two bonded dissimilar piezoelectric strips

Wu, X. F., Dzenis, Y. A. & Fan, T. Y., 2003, In : Mechanics Research Communications. 30, 6, p. 547-555 9 p.

Research output: Contribution to journalArticle

4 Scopus citations

Spatial and temporal variability of soil nitrate and corn yield: Multifractal analysis

Eghball, B., Schepers, J. S., Negahban, M. & Schlemmer, M. R., Mar 2003, In : Agronomy Journal. 95, 2, p. 339-346 8 p.

Research output: Contribution to journalArticle

56 Scopus citations

Stress-induced frequency shifts in langasite thickness-mode resonators

Kosinski, J. A., Pastore, R. A., Yang, X., Yang, J. & Turner, J. A., 2003, In : Proceedings of the Annual IEEE International Frequency Control Symposium. p. 716-722 7 p.

Research output: Contribution to journalConference article

10 Scopus citations

Study of pulse electrochemical micro machining

Kozak, J., Rajurkar, K. P. & Makkar, Y., 2003, 31st North American Manufacturing Research Conference 2003 - Transactions of the North American Manufacturing Research Institution of SME. p. 363-370 8 p. (Transactions of the North American Manufacturing Research Institution of SME; vol. 31).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Scopus citations

Theoretical study of the transient shock wave propagation during laser ablation

Zhang, Z. & Gogos, G., 2003, Proceedings of the 003 ASME Summer Heat Transfer Conference, Volume 1. American Society of Mechanical Engineers, p. 533-539 7 p. (Proceedings of the ASME Summer Heat Transfer Conference; vol. 2003).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Two-Dimensional Equations for Electroelastic Plates with Relatively Large Shear Deformations

Yang, J. S., Yang, X., Turner, J. A., Kosinski, J. A. & Pastore, R. A., Jul 2003, In : IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control. 50, 7, p. 765-772 8 p.

Research output: Contribution to journalArticle

15 Scopus citations

Two semi-infinite interfacial cracks between two bonded dissimilar elastic strips

Wu, X. F., Dzenis, Y. A. & Fan, T. Y., Sep 2003, In : International Journal of Engineering Science. 41, 15, p. 1699-1710 12 p.

Research output: Contribution to journalArticle

8 Scopus citations
2004

Amplification of acoustic waves in laminated piezoelectric semiconductor plates

Yang, J. S., Yang, X. M. & Turner, J. A., Dec 2004, In : Archive of Applied Mechanics. 74, 3-4, p. 288-298 11 p.

Research output: Contribution to journalReview article

7 Scopus citations
8 Scopus citations

A new multicomponent diffusion formulation for the finite-volume method

Pope, D. N. & Gogos, G., 2004, In : American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD. 375, 1, p. 87-93 7 p., IMECE2004-59551.

Research output: Contribution to journalConference article

A real-time model for the robotic highway safety marker system

Shi, J., Goddard, S., Lal, A. & Farritor, S., 2004, Proceedings - RTAS 2004 10th IEEE Real-Time and Embedded Technology and Applications Symposium. p. 331-340 10 p. (Proceedings - IEEE Real-Time and Embedded Technology and Applications Symposium; vol. 10).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

10 Scopus citations

Attenuation of ultrasonic waves in rolled metals

Yang, L. & Turner, J. A., Dec 2004, In : Journal of the Acoustical Society of America. 116, 6, p. 3319-3327 9 p.

Research output: Contribution to journalArticle

21 Scopus citations

Bubble Removal in Rotational Molding

Gogos, G., Feb 2004, In : Polymer Engineering and Science. 44, 2, p. 388-394 7 p.

Research output: Contribution to journalArticle

38 Scopus citations

Cognitive abilities in driving: Differences between normal and hazardous situations

Kim, B. J. & Bishu, R. R., Aug 15 2004, In : Ergonomics. 47, 10, p. 1037-1052 16 p.

Research output: Contribution to journalArticle

7 Scopus citations
11 Scopus citations

Design of experiments for the thermal characterization of metallic foam

Crittenden, P. E. & Cole, K. D., 2004, 37th AIAA Thermophysics Conference. American Institute of Aeronautics and Astronautics Inc., (37th AIAA Thermophysics Conference).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dynamic behaviour of dagger-shaped cantilevers for atomic force microscopy

Shen, K., Hurley, D. C. & Turner, J. A., Nov 2004, In : Nanotechnology. 15, 11, p. 1582-1589 8 p.

Research output: Contribution to journalArticle

36 Scopus citations

Edge-cracked orthotropic bimaterial butt joint under antiplane singularity

Wu, X. F., Dzenis, Y. A. & Gokdag, E., 2004, In : International Journal of Nonlinear Sciences and Numerical Simulation. 5, 4, p. 347-354 8 p.

Research output: Contribution to journalArticle

5 Scopus citations

Effects of laser intensity and ambient conditions on the laser induced plume

Zhang, Z. & Gogos, G., 2004, In : American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD. 375, 3, p. 483-489 7 p., IMECE2004-60421.

Research output: Contribution to journalConference article

Embedded PVDF film sensor for in-situ monitoring of structural integrity of laminated composites

Kwon, O. Y. & Dzenis, Y. A., 2004, In : Key Engineering Materials. 270-273, III, p. 1929-1934 6 p.

Research output: Contribution to journalConference article

5 Scopus citations

Endoluminal treatment of GERD--role in contemporary clinical practice.

DiBaise, J. K. & Oleynikov, D., 2004, In : MedGenMed : Medscape general medicine. 6, 3, p. 15 1 p.

Research output: Contribution to journalReview article

1 Scopus citations

Endoscopic therapy for gastroesophageal reflux disease: Can it replace antireflux surgery?

Oleynikov, D., Oelschlager, B. & Dibaise, J., Oct 2004, In : Minerva Chirurgica. 59, 5, p. 427-435 9 p.

Research output: Contribution to journalReview article

3 Scopus citations

Fast-converging series for heat conduction in the circular cylinder

Cole, K. D., Jul 2004, In : Journal of Engineering Mathematics. 49, 3, p. 217-232 16 p.

Research output: Contribution to journalArticle

6 Scopus citations

Gastroenterology Expert Column - Endoluminal treatment of GERD - Role in contemporary clinical practice

DiBaise, J. K. & Oleynikov, D., 2004, MedGenMed Medscape General Medicine. 3 ed. Vol. 6.

Research output: Chapter in Book/Report/Conference proceedingChapter

Humidity effects on the determination of elastic properties by atomic force acoustic microscopy

Hurley, D. C. & Turner, J. A., Mar 1 2004, In : Journal of Applied Physics. 95, 5, p. 2403-2407 5 p.

Research output: Contribution to journalArticle

27 Scopus citations

Imaging using lateral bending modes of atomic force microscope cantilevers

Caron, A., Rabe, U., Reinstädtler, M., Turner, J. A. & Arnold, W., Dec 27 2004, In : Applied Physics Letters. 85, 26, p. 6398-6400 3 p.

Research output: Contribution to journalArticle

19 Scopus citations

Intelligent highway safety markers

Farritor, S. M. & Goddard, S., Nov 2004, In : IEEE Intelligent Systems. 19, 6, p. 8-11 4 p.

Research output: Contribution to journalReview article

12 Scopus citations

Investigation of femtosecond laser-assisted micromachining of lithium niobate

Malshe, A., Deshpande, D., Stach, E., Rajurkar, K. & Alexander, D., 2004, In : CIRP Annals - Manufacturing Technology. 53, 1, p. 187-190 4 p.

Research output: Contribution to journalArticle

14 Scopus citations

In vivo camera robots provide improved vision for laparoscopic surgery

Oleynikov, D., Rentschler, M., Hadzialic, A., Dumpert, J., Platt, S. & Farritor, S., Jun 1 2004, In : International Congress Series. 1268, C, p. 787-792 6 p.

Research output: Contribution to journalArticle

4 Scopus citations

In vivo robots for laparoscopic surgery

Rentschler, M. E., Hadzialic, A., Dumpert, J., Platt, S. R., Farritor, S. & Oleynikov, D., 2004, Medicine Meets Virtual Reality 12 - Building a Better You: The Next Tools for Medical Education, Diagnosis and Care. IOS Press, p. 316-322 7 p. (Studies in Health Technology and Informatics; vol. 98).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

26 Scopus citations

J-integral analysis of PCBN tool crack propagation in hybrid machining of Advanced Materials

Wang, Z. Y., Rajurkar, K. P., Fan, J. & Petrescu, G., 2004, In : Journal of Manufacturing Processes. 6, 2, p. 196-200 5 p.

Research output: Contribution to journalArticle

Machining of low electrical conductive materials by wire electrical discharge machining (WEDM)

Kozak, J., Rajurkar, K. P. & Chandarana, N., Jun 10 2004, In : Journal of Materials Processing Technology. 149, 1-3, p. 266-271 6 p.

Research output: Contribution to journalArticle

82 Scopus citations

Modern manufacturing

Smith, S., Schafrik, R. E., Liang, S. Y., Howes, T. D., Webster, J., Marinescu, I., Rajurkar, K. P., Wang, W. M., Altan, T., Wang, W., Ridilla, A., Buczek, M., Pence, I., Yamaguchi, T., Taketomi, Y., Kempf, C. J., Fildes, J., Koren, Y., Tomizuka, M., Lau, K. & 11 others, Anderson, D. C., Chang, T. C., Grant, H., Liu, T. I., Tanchoco, J. M. A., Lee, A. C., Yang, S. H., Nakagawa, T., Cook, H. E., Wang, C. & Mahajan, R. L., Jan 1 2004, The CRC Handbook of Mechanical Engineering, Second Edition. CRC Press, p. 13-1-13-153

Research output: Chapter in Book/Report/Conference proceedingChapter

Nanotribological properties of nanocomposite CrBN and TiBN thin films

Rohde, S. L., Mihut, D. M., Aouadi, S. M. & Turner, J., 2004, Surface Engineering - Proceedings of the 3rd International Surface Engineering Congress. Dahotre, N. B. & Popoola, O. O. (eds.). p. 201-206 6 p. (Surface Engineering - Proceedings of the 3rd International Surface Engineering Conference).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Non-linear vibrations of a beam with cantilever-Hertzian contact boundary conditions

Turner, J. A., Aug 6 2004, In : Journal of Sound and Vibration. 275, 1-2, p. 177-191 15 p.

Research output: Contribution to journalArticle

57 Scopus citations

Planetary cliff descent using cooperative robots

Mumm, E., Farritor, S., Pirjanian, P., Leger, C. & Schenker, P., May 2004, In : Autonomous Robots. 16, 3, p. 259-272 14 p.

Research output: Contribution to journalArticle

22 Scopus citations

Ranque-hilsch vortex tube thermocycler for DNA amplification

Ebmeier, R., Whitney, S., Alugupally, S., Nelson, M., Padhye, N., Gogos, G. & Viljoen, H. J., Sep 2004, In : Instrumentation Science and Technology. 32, 5, p. 567-570 4 p.

Research output: Contribution to journalArticle

4 Scopus citations

Ranque-Hilsch vortex tube thermocycler for fast DMA amplification and real-time optical detection

Ebmeier, R. J., Whitney, S. E., Sarkar, A., Nelson, M., Padhye, N. V., Gogos, G. & Viljoen, H. J., Dec 2004, In : Review of Scientific Instruments. 75, 12, p. 5356-5359 4 p.

Research output: Contribution to journalArticle

6 Scopus citations

Ranque-Hilsch vortex tube thermocycler for fast DNA amplification and real-time optical detection

Ebmeier, R. J., Gogos, G., Whitney, S. E., Sarkar, A., Viljoen, H. J., Nelson, M. & Padhye, N. V., 2004, AIChE Annual Meeting, Conference Proceedings. p. 10479-10485 7 p. 554e

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations
1 Scopus citations

Selected problems of micro-electrochemical machining

Kozak, J., Rajurkar, K. P. & Makkar, Y., Jun 10 2004, In : Journal of Materials Processing Technology. 149, 1-3, p. 426-431 6 p.

Research output: Contribution to journalArticle

85 Scopus citations