Mechanical & Materials Engineering

Research Output

Filter
Conference contribution
2019

Comparison of self-organized micro/nanostructure formation on copper using dual-pulse versus single-pulse femtosecond laser surface processing

Zuhlke, C. A., Roth, N., Ediger, A., Tsubaki, A., Peng, E., Anderson, M., Kruse, C., Shield, J., Gogos, G. & Alexander, D. R., Jan 1 2019, Laser-Based Micro- and Nanoprocessing XIII. Klotzbach, U., Watanabe, A. & Kling, R. (eds.). SPIE, 109060Q. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 10906).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Deep learning segmentation of coronary calcified plaque from intravascular optical coherence tomography (IVOCT) images with application to finite element modeling of stent deployment

Gharaibeh, Y., Dong, P., Prabhu, D., Kolluru, C., Lee, J., Zimin, V., Mozafari, H., Bizzera, H., Gu, L. & Wilson, D., Jan 1 2019, Medical Imaging 2019: Image-Guided Procedures, Robotic Interventions, and Modeling. Fei, B. & Linte, C. A. (eds.). SPIE, 109511C. (Progress in Biomedical Optics and Imaging - Proceedings of SPIE; vol. 10951).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Design and kinematics of a modular robot for assistive tasks for the disabled

Nelson, C. A., Bruckner, M. A., Chae, J. S., Burnfield, J. M., Buster, T. W., Cesar, G. M., Pfeifer, C. M. & Dasgupta, P., Jan 1 2019, 43rd Mechanisms and Robotics Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 5A-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Development of an in vitro traumatic brain injury model using 3d cultured neural stem cells and 3d printed device

Shi, W., Kuss, M. A., Dong, P., Gu, L., Kim, H. J. & Duan, B., Jan 1 2019, Society for Biomaterials Annual Meeting and Exposition 2019: The Pinnacle of Biomaterials Innovation and Excellence - Transactions of the 42nd Annual Meeting. Society for Biomaterials, 1 p. (Transactions of the Annual Meeting of the Society for Biomaterials and the Annual International Biomaterials Symposium; vol. 40).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Flow characterization of microfluidic paper-based analytical devices with hollow channels

Zhang, H., Barmore, D. & Ryu, S., Jan 1 2019, Fluid Measurement and Instrumentation; Micro and Nano Fluid Dynamics. American Society of Mechanical Engineers (ASME), (ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference, AJKFluids 2019; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Improved surgical robot design using a novel compliant rolling-contact joint

Nelson, C. A., Dempsey, C. A., Brush, E. R. & Amine Laribi, M., Jan 1 2019, 43rd Mechanisms and Robotics Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 5B-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Modular self-reconfigurable robot for autonomous rehabilitation assistance in daily living tasks for spinal cord injury patients

Nelson, C. A., Bruckner, M. A., Chae, J. S., Burnfield, J. M., Buster, T. W., Cesar, G. M., Pfeifer, C. M. & Dasgupta, P., Jan 1 2019, Frontiers in Biomedical Devices, BIOMED - 2019 Design of Medical Devices Conference, DMD 2019. American Society of Mechanical Engineers (ASME), (Frontiers in Biomedical Devices, BIOMED - 2019 Design of Medical Devices Conference, DMD 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
2 Scopus citations

Predicting part-level thermal history in metal additive manufacturing using graph theory: Experimental validation with directed energy deposition of titanium alloy parts

Yavari, R., Severson, J., Gaikwad, A., Cole, K. & Rao, P., Jan 1 2019, Additive Manufacturing; Manufacturing Equipment and Systems; Bio and Sustainable Manufacturing. American Society of Mechanical Engineers (ASME), (ASME 2019 14th International Manufacturing Science and Engineering Conference, MSEC 2019; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Quantification of Cell Adhesion Strength using Energy Dissipation from Quartz Microbalance with Dissipation Monitoring

Esfahani, A. M., Rosenbohm, J. & Yang, R., Jul 2019, 19th IEEE International Conference on Nanotechnology, NANO 2019. IEEE Computer Society, p. 265-268 4 p. 8993951. (Proceedings of the IEEE Conference on Nanotechnology; vol. 2019-July).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2018

A Bistable Underactuated Finger with Reconfigurable Grasping Modes

Nelson, C. A., Aug 28 2018, 2018 International Conference on Reconfigurable Mechanisms and Robots, ReMAR 2018 - Proceedings. Herder, J. L. & van der Wijk, V. (eds.). Institute of Electrical and Electronics Engineers Inc., 8449860. (2018 International Conference on Reconfigurable Mechanisms and Robots, ReMAR 2018 - Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A positively-engaged infinitely variable transmission using split helical gears

Brush, E. R. & Nelson, C. A., Jan 1 2018, 42nd Mechanisms and Robotics Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 5B-2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A review of additive manufacturing of magnesium alloys

Jahangir, M. N., Mamun, M. A. H. & Sealy, M. P., Jul 13 2018, International Conference on Mechanical Engineering: Proceedings of the 12th International Conference on Mechanical Engineering, ICME 2017. Al Nur, M., Ali, M. & Ahmed, S. R. (eds.). American Institute of Physics Inc., 030026. (AIP Conference Proceedings; vol. 1980).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

Characterization and modeling of PEEK in histories with reverse loading

Li, W., Gazonas, G., Brown, E. N., Rae, P. J. & Negahban, M., Jan 1 2018, Challenges in Mechanics of Time Dependent Materials - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. Silberstein, M., Arzoumanidis, A. & Amirkhizi, A. (eds.). Springer New York LLC, p. 65-69 5 p. (Conference Proceedings of the Society for Experimental Mechanics Series; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Degradation modeling of bioabsorbable polymer stent

Dong, P., Wang, L. & Gu, L., Jan 1 2018, Biomedical and Biotechnology Engineering. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Improved design of a gait rehabilitation robot

Stolle, C. J., Nelson, C. A., Burnfield, J. M. & Buster, T. W., Jan 1 2018, New Trends in Medical and Service Robots - Design, Analysis and Control. Hofbaur, M. & Husty, M. (eds.). Springer Netherlands, p. 31-44 14 p. (Mechanisms and Machine Science; vol. 48).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Modeling and testing a family of surgical robots: An experience report

Mansoor, N., Saddler, J. A., Silva, B., Bagheri, H., Cohen, M. B. & Farritor, S., Oct 26 2018, ESEC/FSE 2018 - Proceedings of the 2018 26th ACM Joint Meeting on European So ftware Engineering Conference and Symposium on the Foundations of So ftware Engineering. Garci, A., Pasareanu, C. S. & Leavens, G. T. (eds.). Association for Computing Machinery, Inc, p. 785-790 6 p. (ESEC/FSE 2018 - Proceedings of the 2018 26th ACM Joint Meeting on European Software Engineering Conference and Symposium on the Foundations of Software Engineering).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

On improving stiffness of cable robots

Nelson, C. A., Jan 1 2018, Cable-Driven Parallel Robots - Proceedings of the 3rd International Conference on Cable-Driven Parallel Robots. Bruckmann, T., Gosselin, C., Cardou, P. & Pott, A. (eds.). Springer Netherlands, p. 331-339 9 p. (Mechanisms and Machine Science; vol. 53).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

Optimization of a redundant serial spherical mechanism for robotic minimally invasive surgery

Nelson, C. A., Laribi, M. A. & Zeghloul, S., Jan 1 2018, Computational Kinematics - Proceedings of the 7th International Workshop on Computational Kinematics, 2017. Zeghloul, S., Laribi, M. A. & Romdhane, L. (eds.). Springer Netherlands, p. 126-134 9 p. (Mechanisms and Machine Science; vol. 50).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Prototyping and validation of a fixed-actuator 3-leg 6-DOF robot

Jensen, N. A. & Nelson, C. A., Jan 1 2018, 42nd Mechanisms and Robotics Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 5B-2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Static analysis and dimensional optimization of a cable-driven parallel robot

Newman, M., Zygielbaum, A. & Terry, B., Jan 1 2018, Cable-Driven Parallel Robots - Proceedings of the 3rd International Conference on Cable-Driven Parallel Robots. Bruckmann, T., Gosselin, C., Cardou, P. & Pott, A. (eds.). Springer Netherlands, p. 152-166 15 p. (Mechanisms and Machine Science; vol. 53).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

Stochastic modeling and analysis of spindle energy consumption during hard milling with a focus on tool wear

Wang, X., Williams, R. E., Sealy, M. P., Rao, P. & Guo, Y., Jan 1 2018, Manufacturing Equipment and Systems. American Society of Mechanical Engineers (ASME), (ASME 2018 13th International Manufacturing Science and Engineering Conference, MSEC 2018; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

The effect of a spanwise body force on skin-friction reduction and its connections to low-drag states in turbulent flow

Hafner, T. A. & Park, J. S., Jan 1 2018, Fluids Engineering. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 7).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

The influence of primary blast wave on the posterior part of the eyeball

Tong, J. & Gu, L., Jan 1 2018, Biomedical and Biotechnology Engineering. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Unmanned Aerial Auger for Underground Sensor Installation

Sun, Y., Plowcha, A., Nail, M., Elbaum, S., Terry, B. & Detweiler, C., Dec 27 2018, 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2018. Institute of Electrical and Electronics Engineers Inc., p. 1374-1381 8 p. 8593824. (IEEE International Conference on Intelligent Robots and Systems).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations
2017

Accelerated electrochemical machining tool design via multiphysics modeling

Skinn, B., Hall, T. D., Snyder, S., Rajurkar, K. P. & Taylor, E. J., Jan 1 2017, Selected Proceedings from the 231st ECS Meeting New Orleans, LA - Spring 2017. 11 ed. Electrochemical Society Inc., p. 963-979 17 p. (ECS Transactions; vol. 77, no. 11).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Adaptive locomotion learning in modular self-reconfigurable robots: A game theoretic approach

Dutta, A., Dasgupta, P. & Nelson, C., Dec 13 2017, IROS 2017 - IEEE/RSJ International Conference on Intelligent Robots and Systems. Institute of Electrical and Electronics Engineers Inc., p. 3556-3561 6 p. 8206200. (IEEE International Conference on Intelligent Robots and Systems; vol. 2017-September).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

A fixed-actuator configuration for 3-LEG 6-DOF robots

Nelson, C. A., Jan 1 2017, 41st Mechanisms and Robotics Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 5A-2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

A pan/tilt surgical camera with parallel structure and elastic platform

Shen, T., Nelson, C. & Oleynikov, D., Jan 1 2017, Frontiers in Biomedical Devices, BIOMED - 2017 Design of Medical Devices Conference, DMD 2017. American Society of Mechanical Engineers, (Frontiers in Biomedical Devices, BIOMED - 2017 Design of Medical Devices Conference, DMD 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Back stress in modeling the response of PEEK and PC

Li, W., Gazonas, G., Brown, E. N., Rae, P. J. & Negahban, M., Jan 1 2017, Challenges in Mechanics of Time Dependent Materials- Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics. Furmanski, J., Qi, H. J., Arzoumanidis, A., Amirkhizi, A., Silberstein, M., Lu, H. & Antoun, B. (eds.). Springer New York LLC, p. 181-186 6 p. (Conference Proceedings of the Society for Experimental Mechanics Series; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Design of an adjustable table mount for multifunctional NOTES robot

Fischer, S., Shen, T., Nelson, C. & Oleynikov, D., Jan 1 2017, Frontiers in Biomedical Devices, BIOMED - 2017 Design of Medical Devices Conference, DMD 2017. American Society of Mechanical Engineers, (Frontiers in Biomedical Devices, BIOMED - 2017 Design of Medical Devices Conference, DMD 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Frequency domain approach for dynamics identification of the actuator with asymmetric hysteresis

Sun, Z., Cheng, Y., Xi, N., Bi, S., Li, C., Song, B., Yang, R., Hao, L. & Chen, L., Aug 21 2017, 2017 IEEE International Conference on Advanced Intelligent Mechatronics, AIM 2017. Institute of Electrical and Electronics Engineers Inc., p. 364-369 6 p. 8014044. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

Image-based modeling of optic nerve head mechanics following lumbar puncture

Tong, J., Ghate, D., Kedar, S. & Gu, L., Jan 1 2017, Frontiers in Biomedical Devices, BIOMED - 2017 Design of Medical Devices Conference, DMD 2017. American Society of Mechanical Engineers, (Frontiers in Biomedical Devices, BIOMED - 2017 Design of Medical Devices Conference, DMD 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Numerical analysis of blood flow through discrete stenosis: Role of eccentricity and spacing ratio

Ju, S. & Gu, L., Jan 1 2017, Frontiers in Biomedical Devices, BIOMED - 2017 Design of Medical Devices Conference, DMD 2017. American Society of Mechanical Engineers, (Frontiers in Biomedical Devices, BIOMED - 2017 Design of Medical Devices Conference, DMD 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

OCT-based three dimensional modeling of stent deployment

Dong, P., Prabhu, D., Wilson, D. L., Bezerra, H. G. & Gu, L., Jan 1 2017, Biomedical and Biotechnology Engineering. American Society of Mechanical Engineers (ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Pose-independent counterweighting of cable-suspended payloads with application to rehabilitation

Nelson, C., Thienpont, R. & Shinde, A., Jan 1 2017, New Trends in Mechanism and Machine Science: Theory and Industrial Applications. Wenger, P. & Flores, P. (eds.). Kluwer Academic Publishers, p. 345-353 9 p. (Mechanisms and Machine Science; vol. 43).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

QFD approach to define CSR: Indian perspective

Babu, S., Krishnakumar, U. & Bishu, R., Jan 1 2017, 7th Annual Conference on Industrial Engineering and Operations Management, IEOM 2017. IEOM Society, p. 1654-1673 20 p. (Proceedings of the International Conference on Industrial Engineering and Operations Management).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Role of copper oxide layer on pool boiling performance with femtosecond laser processed surfaces

Kruse, C., Peng, E., Zuhlke, C., Shield, J., Alexander, D., Ndao, S. & Gogos, G., Jan 1 2017, ASME 2017 15th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM 2017. American Society of Mechanical Engineers, (ASME 2017 15th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Stability improvement of a four cable-driven parallel manipulator using a center of mass balance system

Salafian, I., Stewart, B., Newman, M., Zygielbaum, A. I. & Terry, B., Jan 1 2017, Hyperspectral Imaging Sensors: Innovative Applications and Sensor Standards 2017. Bannon, D. P. (ed.). SPIE, 102130K. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 10213).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Structure, ferroelectric and mechanical performance of polycrystalline gadolinium-doped lead lanthanum zirconate titanate ceramics

Mansour, S. F., Eid, A. M., El-Latif, L. A., Rashad, M. M., Ducharme, S., Afifi, M. & Turner, J. A., Aug 1 2017, 2017 Joint IEEE International Symposium on Applications of Ferroelectrics, International Workshop on Acoustic Transduction Materials and Devices and Piezoresponse Force Microscopy Workshop, ISAF-IWATMD-PFM 2017 - Conference. Institute of Electrical and Electronics Engineers Inc., p. 63-67 5 p. 8000213. (2017 Joint IEEE International Symposium on Applications of Ferroelectrics, International Workshop on Acoustic Transduction Materials and Devices and Piezoresponse Force Microscopy Workshop, ISAF-IWATMD-PFM 2017 - Conference).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

Target lesion calcium arc influence the performance of stenting

Dong, P., Lin, S., Wilson, D. L., Bezerra, H. G. & Gu, L., Jan 1 2017, Frontiers in Biomedical Devices, BIOMED - 2017 Design of Medical Devices Conference, DMD 2017. American Society of Mechanical Engineers, (Frontiers in Biomedical Devices, BIOMED - 2017 Design of Medical Devices Conference, DMD 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ureterovesical junction competence depends on ureteral orifice more than intravesical tunnel length

Tong, J., Villanueva, C. A., Nelson, C. & Gu, L., Jan 1 2017, Frontiers in Biomedical Devices, BIOMED - 2017 Design of Medical Devices Conference, DMD 2017. American Society of Mechanical Engineers, (Frontiers in Biomedical Devices, BIOMED - 2017 Design of Medical Devices Conference, DMD 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2016

A model to assess quality of disaster reliief efforts

Manoj, P. & Bishu, R. R., Jan 1 2016, 6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016. IEOM Society, p. 3029-3030 2 p. (Proceedings of the International Conference on Industrial Engineering and Operations Management; vol. 8-10 March 2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Chapter 6: Nano to macro: Mechanical evaluation of macroscopically long individual nanofibers

Papkov, D., Maleckis, K., Zou, Y., Andalib, M., Goponenko, A. & Dzenis, Y., Jan 1 2016, MEMS and Nanotechnology - Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics. Prorok, B. C. & Starman, L. V. (eds.). Springer New York LLC, p. 35-43 9 p. (Conference Proceedings of the Society for Experimental Mechanics Series; vol. 5).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

Coordination of modular robots by means of topology discovery and leader election: Improvement of the locomotion case

Baca, J., Woosley, B., Dasgupta, P., Dutta, A. & Nelson, C., Jan 1 2016, Distributed Autonomous Robotic Systems - The 12th International Symposium. Cho, Y-J. & Chong, N-Y. (eds.). Springer Verlag, p. 447-458 12 p. (Springer Tracts in Advanced Robotics; vol. 112).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

Effects of hand dominance and postural selection on muscle activities of virtual laparoscopic surgical training tasks

Huang, C. K., Boman, A., White, A., Oleynikov, D. & Siu, K. C., Jan 1 2016, Medicine Meets Virtual Reality 22, NextMed/MMVR 22. Fellander-Tsai, L., Vosburgh, K. G., Westwood, J. D., Senger, S., Westwood, S. W., Fidopiastis, C. M. & Liu, A. (eds.). IOS Press, p. 142-145 4 p. (Studies in Health Technology and Informatics; vol. 220).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

Enumeration of configurations and their kinematics for ModRED II modular robots

Hossain, K. M., Nelson, C. A. & Dasgupta, P., Jan 1 2016, 40th Mechanisms and Robotics Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 5B-2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Human gaze commands classification: A shape based approach to interfacing with robots

Craig, T. L., Nelson, C. A., Li, S. & Zhang, X., Oct 7 2016, MESA 2016 - 12th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications - Conference Proceedings. Institute of Electrical and Electronics Engineers Inc., 7587154. (MESA 2016 - 12th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications - Conference Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Influence of intracranial pressure on the lamina Cribrosa

Tong, J., Hua, Y., Ghate, D., Kedar, S. & Gu, L., Jan 1 2016, Biomedical and Biotechnology Engineering. American Society of Mechanical Engineers (ASME), 2602031. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Integration of automated camera steering for robotic single-site surgery

Zahiri, M., Nelson, C. A., Gonzalo Garay-Romero, R. & Oleynikov, D., Jan 1 2016, Robotics and Mechatronics - Proceedings of the 4th IFToMM International Symposium on Robotics and Mechatronics. Zeghloul, S., Laribi, M. A. & Gazeau, J-P. (eds.). Kluwer Academic Publishers, p. 153-160 8 p. (Mechanisms and Machine Science; vol. 37).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Scopus citations

Investigating the influence of hand dominance on postural sway during traditional and simulated laparoscopic surgical skills practice

White, A., Huang, C. K., Oleynikov, D. & Siu, K. C., Jan 1 2016, Medicine Meets Virtual Reality 22, NextMed/MMVR 22. Fellander-Tsai, L., Vosburgh, K. G., Westwood, J. D., Senger, S., Westwood, S. W., Fidopiastis, C. M. & Liu, A. (eds.). IOS Press, p. 450-453 4 p. (Studies in Health Technology and Informatics; vol. 220).

Research output: Chapter in Book/Report/Conference proceedingConference contribution