Mechanical & Materials Engineering

2020

Effect of process parameters and shot peening on mechanical behavior of ABS parts manufactured by fused filament fabrication (FFF)

Kanger, C., Hadidi, H., Akula, S., Sandman, C., Quint, J., Alsunni, M., Underwood, R., Slafter, C., Sonderup, J., Spilinek, M., Casias, J., Rao, P. & Sealy, M. P., 2020, p. 444-458. 15 p.

Research output: Contribution to conference › Paper › peer-review

7 Scopus citations

Effect of Process Parameters and Shot Peening on the Tensile Strength and Deflection of Polymer Parts Made using Mask Image Projection Stereolithography (MIP-SLA)

Madireddy, G., Montazeri, M., Curtis, E., Berger, J., Underwood, N., Khayari, Y., Marth, B., Smith, B., Christy, S., Krueger, K., Sealy, M. P. & Rao, P., 2020, p. 1761-1770. 10 p.

Research output: Contribution to conference › Paper › peer-review

4 Scopus citations

Rheological, in situ printability and cell viability analysis of hydrogels for muscle tissue regeneration

Ramesh, S., Gerdes, S., Lau, S., Mostafavi, A., Kong, Z., Johnson, B. N., Tamayol, A., Rao, P. & Rivero, I. V., 2020, p. 835-846. 12 p.

Research output: Contribution to conference › Paper › peer-review

2018

A passive two-degree-of-freedom ankle-foot prosthesis

Elley, C. & Nelson, C. A., 2018.

Research output: Contribution to conference › Paper › peer-review

Open Access

1 Scopus citations

Automation of suturing path generation for da vinci-like surgical robotic systems

Dehghani, H., Farritor, S., Oleynikov, D. & Terry, B., 2018.

Research output: Contribution to conference › Paper › peer-review

7 Scopus citations

Design and development of a novel drug delivery catheter for atherosclerosis

Sarker, S., Chatzizisis, Y. S., Kidambi, S. & Terry, B. S., 2018.

Research output: Contribution to conference › Paper › peer-review

Open Access

3 Scopus citations

Design of a modular, partially disposable robot for minimally invasive surgery

Nelson, N. & Nelson, C. A., 2018.

Research output: Contribution to conference › Paper › peer-review

Open Access

4 Scopus citations

Design of an automated measurement system for episcleral venous pressure

Craig, T. L., Nelson, C. A., Fan, S., Gulati, V., Kedar, S. & Ghate, D., 2018.

Research output: Contribution to conference › Paper › peer-review

Open Access

1 Scopus citations

Mechanical performance of PLLA stent

Wang, L., Wilson, D. L., Tong, J., Bezerra, H. G., Dong, P. & Gu, L., 2018.

Research output: Contribution to conference › Paper › peer-review

Open Access

3 Scopus citations

Preliminary investigation of the mechanics of a novel thoracic cavity extra pulmonary oxygenation device

Aghabaglou, F., Legband, N. D., Xie, W., Kreikemeier-Bower, C., Buesing, K., Slagle, C., Borden, M. & Terry, B. S., 2018.

Research output: Contribution to conference › Paper › peer-review

Open Access

2017

Incorporation of electrospun nanofibers into composites using chemical vapor deposition

Stockdale, T. & Dzenis, Y., 2017.

Research output: Contribution to conference › Paper › peer-review

2016

Finite element modeling of hybrid additive manufacturing by laser shock peening

Sealy, M. P., Madireddy, G., Li, C. & Guo, Y. B., 2016, p. 306-316. 11 p.

Research output: Contribution to conference › Paper › peer-review

22 Scopus citations

2013

Mechanical design and computational aspects for locomotion and reconfiguration of the ModRED Modular Robot

Dasgupta, P., Baca, J., Dutta, A., Hossain, S. M. G. & Nelson, C., 2013, p. 1359-1360. 2 p.

Research output: Contribution to conference › Paper › peer-review

4 Scopus citations

2012

Dynamic reconfiguration in modular robots using graph partitioning-based coalitions

Dasgupta, P., Ufimtsev, V., Nelson, C. & Hossain, S. G. M., 2012, p. 488-495. 8 p.

Research output: Contribution to conference › Paper › peer-review

11 Scopus citations

2011

Ultrasonic scattering in polycrystalline materials under applied loads

Turner, J. A., Kube, C., Ghoshal, G. & Fateh, M., 2011, p. 713-718. 6 p.

Research output: Contribution to conference › Paper › peer-review

2010

Investigation of micro hole drilling in bovine rib using micro rotary ultrasonic machining

Sarwade, A., Sundaram, M. M. & Rajurkar, K. P., 2010, p. 411-416. 6 p.

Research output: Contribution to conference › Paper › peer-review

4 Scopus citations

2009

Numerical simulation of methanol droplet combustion in carbon-dioxide enriched air

Raghavan, V. & Gogos, G., 2009.

Research output: Contribution to conference › Paper › peer-review

2008

Control panel display design based on polar graph

Xuedong, D., Bishu, R. R., Riley, M., Eskridge, K., Stentz, T., Liu, D. & Kulkarni, S. S., 2008, p. 93-97. 5 p.

Research output: Contribution to conference › Paper › peer-review

Integration of balance scorecard with six sigma

Kulkarni, S. S., Messina, J., Xuedong, D. & Bishu, R. R., 2008, p. 1166-1171. 6 p.

Research output: Contribution to conference › Paper › peer-review

1 Scopus citations

2006

Analysis of improvement to two-wheel robot navigation using low-cost GPS/INS aids

Clark, B. J., Bevly, D. M. & Farritor, S., 2006, p. 1440-1448. 9 p.

Research output: Contribution to conference › Paper › peer-review

1 Scopus citations

State-of-the-art review of micro ultrasonic machining

Hu, X., Yu, Z. & Rajurkar, K. P., 2006.

Research output: Contribution to conference › Paper › peer-review

10 Scopus citations

2005

An international assessment of micro-manufacturing research technology

Ehmann, K. F., Bourell, D., Culpepper, M., DeVor, R. E., Hodgson, T., Kurfess, T., Madou, M. & Rajurkar, K., 2005, p. 211-224. 14 p.

Research output: Contribution to conference › Paper › peer-review

3 Scopus citations

Experimental study of micro ultrasonic vibration machining

Hu, X., Yu, Z. & Rajurkar, K. P., 2005, p. 197-210. 14 p.

Research output: Contribution to conference › Paper › peer-review

4 Scopus citations

Frequency shifts in crystal resonators due to intrinsic stresses in unequal thickness electrodes

Yang, X., Yang, J., Kosinski, J. A. & Turner, J. A., 2005, p. 371-374. 4 p.

Research output: Contribution to conference › Paper › peer-review

Novel advanced continuous nanofibers for next generation structural supernanocomposites

Dzenis, Y., 2005.

Research output: Contribution to conference › Paper › peer-review

2004

Time Management in Space Operations

Peacock, B., Bishu, R. & Kimbler, D. L., 2004, p. 1717-1721. 5 p.

Research output: Contribution to conference › Paper › peer-review

Vibration isolation: Harmonic and seismic forcing using the wilson theta method

Carlson, J. A. & Turner, J., 2004, p. 279-286. 8 p.

Research output: Contribution to conference › Paper › peer-review

2003

A dynamic voltage scaling algorithm for sporadic tasks

Qadi, A., Goddard, S. & Farritor, S., 2003, p. 52-62. 11 p.

Research output: Contribution to conference › Paper › peer-review

79 Scopus citations

Delta performance models for selection in decision-based design

Gao, X. & Farritor, S., 2003, p. 423-429. 7 p.

Research output: Contribution to conference › Paper › peer-review

Nonlinear Vibrations in Contact Atomic Force Microscopy

Turner, J. A., 2003, p. 1821-1830. 10 p.

Research output: Contribution to conference › Paper › peer-review

6 Scopus citations

2002

Drilling of noncircular blind micro holes by micro EDM

Yu, Z., Rajurkar, K. P. & Shen, H., 2002, p. 1-8. 8 p.

Research output: Contribution to conference › Paper › peer-review

Performance characteristics in rotary abrasive electrodischarge machining (RAEDM)

Kozak, J., Rajurkar, K. P. & Khilnani, H. G., 2002, p. 1-8. 8 p.

Research output: Contribution to conference › Paper › peer-review

2001

2 Scopus citations

2000

A modular robotic infrastructure to support planetary surface operations

Farritor, S. & Zhang, J., 2000.

Research output: Contribution to conference › Paper › peer-review

1 Scopus citations

Cognitive Impact of Telepresence on Online Retail Environments

Muralidhar, A., Meyer, J., Abrams, D. & Bishu, R., 2000, p. 433-436. 4 p.

Research output: Contribution to conference › Paper › peer-review

Errors in Shipping

Bishu, R. R., 2000, p. 443-446. 4 p.

Research output: Contribution to conference › Paper › peer-review

1 Scopus citations

Glove comfort vs. discomfort: Are they part of a continuum or not? A mulit-dimensional scaling analysis

Cherry, J., Christensen, A. & Bishu, R., 2000, p. 95-98. 4 p.

Research output: Contribution to conference › Paper › peer-review

2 Scopus citations

Hand tools design: Are biomechanical criteria the same as aesthetic criteria? A preliminary study

Christensen, A. D. & Bishu, R. R., 2000, p. 574-577. 4 p.

Research output: Contribution to conference › Paper › peer-review

3 Scopus citations

Human Factors of the Web Design Process

Bishu, R. R., 2000, p. 437-440. 4 p.

Research output: Contribution to conference › Paper › peer-review

1 Scopus citations

Integration of information technology and TQM

Najjar, L. & Bishu, R. R., 2000, p. 519-522. 4 p.

Research output: Contribution to conference › Paper › peer-review

Quality concerns of web design process

Liu, D., Tarawneh, I. S. & Bishu, R., 2000, p. 527-530. 4 p.

Research output: Contribution to conference › Paper › peer-review

1999

Modeling and verification of interelectrode gap in electrochemical machining with passivating electrolyte

Zhu, D. & Rajurkar, K. P., 1999, p. 589-596. 8 p.

Research output: Contribution to conference › Paper › peer-review

25 Scopus citations

1998

Axisymmetric finite element models of rotational molding

Olson, L. G., Gogos, G., Pasham, V. & Liu, X., 1998, p. 1116-1120. 5 p.

Research output: Contribution to conference › Paper › peer-review

1 Scopus citations

Cycle based modeling of composite fatigue

Dzenis, Y. A., 1998, p. 175-176. 2 p.

Research output: Contribution to conference › Paper › peer-review

Cycle time predictions for the rotational molding process with and without mold/part separation

Gogos, G., Liu, X. & Olson, L. G., 1998, p. 1133-1136. 4 p.

Research output: Contribution to conference › Paper › peer-review

1997

Computational model for rotational molding of thermoplastics

Gogos, G., Olson, L., Liu, X. & Pasham, V. R., 1997, p. 3216-3219. 4 p.

Research output: Contribution to conference › Paper › peer-review

1 Scopus citations

Transient laminar natural convection heat transfer over an isothermal sphere: flow separation and associated wake vortex

Gogos, G. & Yang, S., 1997, p. 9. 9 p.

Research output: Contribution to conference › Paper › peer-review

1 Scopus citations

1995

Dynamic analysis of the ultrasonic machining process

Wang, Z. Y. & Rajurkar, K. P., 1995, p. 87-97. 11 p.

Research output: Contribution to conference › Paper › peer-review

2 Scopus citations

Mechanical & Materials Engineering

Research output

Search results