Mechanical & Materials Engineering

2022

Areal surface texture and tool wear analysis from machining during powder bed fusion

Avegnon, K. L. M., Schmitter, D. C., Meisman, S., Hadidi, H., Vieille, B. & Sealy, M. P., 2022, In: Procedia CIRP. 108, C, p. 704-709 6 p.

Research output: Contribution to journal › Conference article › peer-review

Open Access

5 Scopus citations

Directional Broadband Emissivity with Angled Microstructures Produced via Femtosecond Laser Surface Processing

Reicks, A., Butler, A., Castejon-Cruz, G., Gogos, G., Alexander, D., Argyropoulos, C. & Zuhlke, C., 2022, In: Optics InfoBase Conference Papers. JTh3A.3.

Research output: Contribution to journal › Conference article › peer-review

Exploring Properties of Edible Hydrolyzed Collagen for 3D Food Printing of Scaffold for Biomanufacturing Cultivated Meat

Koranne, V., Li Cong Jonas, O., Mitra, H., Bapat, S., Ardekani, A. M., Sealy, M. P., Rajurkar, K. & Malshe, A. P., 2022, In: Procedia CIRP. 110, C, p. 187-192 6 p.

Research output: Contribution to journal › Conference article › peer-review

Open Access

10 Scopus citations

2020

Challenges in path planning of high energy density beams for additive manufacturing

Karunakaran, K. P., Negi, S., Nambolan, A., Patel, A., Patil, Y., Pandya, M., Kapil, S., Trushnikov, D., Sealy, M. & Bernard, A., Feb 1 2020, In: IOP Conference Series: Materials Science and Engineering. 759, 1, 012012.

Research output: Contribution to journal › Conference article › peer-review

Open Access

2 Scopus citations

Distortion mitigation in additive manufacturing of AlSi10Mg by multilayer laser peening

Madireddy, G., Liu, J. F. & Sealy, M. P., 2020, In: Procedia CIRP. 95, p. 133-137 5 p.

Research output: Contribution to journal › Conference article › peer-review

Open Access

5 Scopus citations

Experimental study: Effect of pore geometry and structural heterogeneity on the repetitive two-phase fluid flow in porous media and its implications to PM-CAES

Zhang, J., Zhang, H., Lee, D., Ryu, S. & Kim, S., Nov 18 2020, In: E3S Web of Conferences. 205, 07010.

Research output: Contribution to journal › Conference article › peer-review

Open Access

1 Scopus citations

2019

Design rules for additive manufacturing – Understanding the fundamental thermal phenomena to reduce scrap

Yavari, M. R., Cole, K. D. & Rao, P. K., 2019, In: Procedia Manufacturing. 33, p. 375-382 8 p.

Research output: Contribution to journal › Conference article › peer-review

Open Access

10 Scopus citations

Evaluation of ecosystem for design assessment and verification by BAJA dynamometer capstone team at the university of Nebraska

Steingrimsson, B., Phan, B., Nelson, C., Frederick, T. & Yi, S., Apr 2 2019, In: SAE Technical Papers. 2019-April, April

Research output: Contribution to journal › Conference article › peer-review

Low velocity impact of ABS after shot peening predefined layers during additive manufacturing

Hadidi, H., Mailand, B., Sundermann, T., Johnson, E., Madireddy, G., Negahban, M., Delbreilh, L. & Sealy, M., 2019, In: Procedia Manufacturing. 34, p. 594-602 9 p.

Research output: Contribution to journal › Conference article › peer-review

Open Access

14 Scopus citations

2018

Nano-finishing Studies Using Elastically Dominant Polymers Blend Abrasive Flow Finishing Medium

Sankar, M. R., Jain, V. K. & Rajurkar, K. P., 2018, In: Procedia CIRP. 68, p. 529-534 6 p.

Research output: Contribution to journal › Conference article › peer-review

17 Scopus citations

2017

Benchmark Burnishing with Almen Strip for Surface Integrity

Liu, Z. Y., Fu, C. H., Sealy, M. P., Zhao, Y. & Guo, Y. B., 2017, In: Procedia Manufacturing. 10, p. 456-466 11 p.

Research output: Contribution to journal › Conference article › peer-review

Open Access

7 Scopus citations

Mechanical engineering capstone projects in rehabilitation design

Nelson, C. A., Burnfield, J. M., Gu, L., Wagler, A. & Dick, W. E., Jun 24 2017, In: ASEE Annual Conference and Exposition, Conference Proceedings. 2017-June

Research output: Contribution to journal › Conference article › peer-review

UNL summer REU program in biomedical devices

Nelson, C. A. & Bashford, G., Jun 24 2017, In: ASEE Annual Conference and Exposition, Conference Proceedings. 2017-June

Research output: Contribution to journal › Conference article › peer-review

1 Scopus citations

2016

A Comparative Study on Machining Capabilities of Wet and Dry Nano-scale Electro-machining

Jahan, M. P., Rajurkar, K. P. & Malshe, A. P., 2016, In: Procedia CIRP. 42, p. 155-160 6 p.

Research output: Contribution to journal › Conference article › peer-review

Open Access

10 Scopus citations

Pulsed Laser Cutting of Magnesium-Calcium for Biodegradable Stents

Sealy, M. P., Guo, Y. B., Liu, J. F. & Li, C., 2016, In: Procedia CIRP. 42, p. 67-72 6 p.

Research output: Contribution to journal › Conference article › peer-review

Open Access

27 Scopus citations

2015

Modelling of the crater formation in micro-EDM

Shao, B. & Rajurkar, K. P., 2015, In: Procedia CIRP. 33, p. 376-381 6 p.

Research output: Contribution to journal › Conference article › peer-review

Open Access

54 Scopus citations

2014

Performance evaluation of orbital EDM along helical path over cavity sinking EDM of Inconel 718

Dave, H. K., Raval, H. K., Desai, K. P. & Rajurkar, K. P., 2014, In: Transactions of the North American Manufacturing Research Institution of SME. 42, January, p. 81-87 7 p.

Research output: Contribution to journal › Conference article › peer-review

2013

A comparative study of the dry and wet nano-scale electro-machining

Jahan, M. P., Virwani, K. R., Rajurkar, K. P. & Malshe, A. P., 2013, In: Procedia CIRP. 6, p. 626-631 6 p.

Research output: Contribution to journal › Conference article › peer-review

Open Access

15 Scopus citations

Review of electrochemical and electrodischarge machining

Rajurkar, K. P., Sundaram, M. M. & Malshe, A. P., 2013, In: Procedia CIRP. 6, p. 13-26 14 p.

Research output: Contribution to journal › Conference article › peer-review

Open Access

374 Scopus citations

Wire electro-discharge machining of titanium alloy

Nourbakhsh, F., Rajurkar, K. P., Malshe, A. P. & Cao, J., 2013, In: Procedia CIRP. 5, p. 13-18 6 p.

Research output: Contribution to journal › Conference article › peer-review

Open Access

134 Scopus citations

2009

Analysis of thickness vibrations of C-axis inclined aluminum-nitrogen thin film resonators

Zhang, H., Turner, J. A. & Kosinski, J. A., 2009, In: Integrated Ferroelectrics. 113, 1, p. 95-108 14 p.

Research output: Contribution to journal › Conference article › peer-review

15 Scopus citations

Dynamic bearing testing aimed at identifying the root cause of warm bearing temperature trending

Tarawneh, C. M., Wilson, B. M., Cole, K. D., Fuentes, A. A. & Cardenas, M., 2009, In: American Society of Mechanical Engineers, Rail Transportation Division (Publication) RTD. p. 199-212 14 p.

Research output: Contribution to journal › Conference article › peer-review

10 Scopus citations

2006

Novel continuous poly(vinylidene fluoride) nanofibers

Ren, X. & Dzenis, Y., 2006, In: Materials Research Society Symposium Proceedings. 920, p. 55-61 7 p.

Research output: Contribution to journal › Conference article › peer-review

22 Scopus citations

2005

A rule induction algorithm for continuous data using analysis of variance

Konda, R. & Rajurkar, K. P., 2005, In: Conference Proceedings - IEEE SOUTHEASTCON. p. 489-494 6 p.

Research output: Contribution to journal › Conference article › peer-review

Study of dielectric flow in micro hole drilling by EDM

Yu, Z. & Rajurkar, K. P., 2005, In: Transactions of the North American Manufacturing Research Institute of SME. 33, p. 81-88 8 p.

Research output: Contribution to journal › Conference article › peer-review

3 Scopus citations

2004

5 Scopus citations

Tool wear compensation and path generation in micro and macro EDM

Narasimhan, J., Yu, Z. & Rajurkar, K. P., 2004, In: Transactions of the North American Manufacturing Research Institute of SME. 32, p. 151-158 8 p.

Research output: Contribution to journal › Conference article › peer-review

24 Scopus citations

Vibration isolation: Harmonic and seismic forcing using the Wilson Theta Method

Carlson, J. A. & Turner, J., 2004, In: ASHRAE Transactions. 110 PART 1, p. 321-328 8 p.

Research output: Contribution to journal › Conference article › peer-review

2003

Analysis of Behavior Based Control for Planetary Cliff Descent Using Cooperative Robots

Mumm, E., Farritor, S., Huntsberger, T. & Schenker, P., 2003, In: Proceedings of SPIE - The International Society for Optical Engineering. 5083, p. 265-276 12 p.

Research output: Contribution to journal › Conference article › peer-review

Crack depth determination in concrete by ultrasound diffusion

Ramamoorthy, S. K., Kane, Y. & Turner, J. A., 2003, In: Proceedings of SPIE - The International Society for Optical Engineering. 5057, p. 551-558 8 p.

Research output: Contribution to journal › Conference article › peer-review

1 Scopus citations

Imaging of flexural and torsional resonance modes of atomic force microscopy cantilevers using optical interferometry

Reinstaedtler, M., Rabe, U., Scherer, V., Turner, J. A. & Arnold, W., Jun 10 2003, In: Surface Science. 532-535, p. 1152-1158 7 p.

Research output: Contribution to journal › Conference article › peer-review

45 Scopus citations

Perturbation theory for degenerate acoustic eigenmodes

Kosinski, J. A., Pastore, R. A., Yang, J., Yang, X. & Turner, J. A., 2003, In: Proceedings of the Annual IEEE International Frequency Control Symposium. p. 734-741 8 p.

Research output: Contribution to journal › Conference article › peer-review

8 Scopus citations

Stress-induced frequency shifts in langasite thickness-mode resonators

Kosinski, J. A., Pastore, R. A., Yang, X., Yang, J. & Turner, J. A., 2003, In: Proceedings of the Annual IEEE International Frequency Control Symposium. p. 716-722 7 p.

Research output: Contribution to journal › Conference article › peer-review

12 Scopus citations

2002

Continuous carbon nanofibers for nanofiber composites

Dzenis, Y. & Wen, Y., 2002, In: Materials Research Society Symposium - Proceedings. 702, p. 173-178 6 p.

Research output: Contribution to journal › Conference article › peer-review

36 Scopus citations

Finite element simulations of nonlinear vibrations of atomic force microscope cantilevers

Shen, K. & Turner, J. A., 2002, In: Proceedings of SPIE - The International Society for Optical Engineering. 4703, p. 93-104 12 p.

Research output: Contribution to journal › Conference article › peer-review

1 Scopus citations

Nonlinear vibrations in atomic force microscopy

Turner, J. A., 2002, In: Proceedings of SPIE - The International Society for Optical Engineering. 4703, p. 74-84 11 p.

Research output: Contribution to journal › Conference article › peer-review

1 Scopus citations

NSF-EC workshop on nanomanufacturing and processing: A summary report

Komanduri, R., Chen, J., Malshe, A. P., Doumanidis, C. C. & Rajurkar, K. P., 2002, In: Proceedings of SPIE - The International Society for Optical Engineering. 4936, p. 446-454 9 p.

Research output: Contribution to journal › Conference article › peer-review

3 Scopus citations

Scattering of ultrasound in damaged concrete

Yang, L. & Turner, J. A., 2002, In: Proceedings of SPIE - The International Society for Optical Engineering. 4702, p. 231-240 10 p.

Research output: Contribution to journal › Conference article › peer-review

Second-order frequency shifts in crystal resonators under relatively large biasing fields

Kosinski, J. A., Pastore, R. A., Yang, J. S., Yang, X. M. & Turner, J. A., 2002, In: Proceedings of the Annual IEEE International Frequency Control Symposium. p. 103-110 8 p.

Research output: Contribution to journal › Conference article › peer-review

11 Scopus citations

2001

2 Scopus citations

Hybrid transient-parametric AE analysis of histories of damage micromechanisms in composites

Dzenis, Y. & Qian, J., 2001, In: Proceedings of SPIE - The International Society for Optical Engineering. 4335, p. 361-370 10 p.

Research output: Contribution to journal › Conference article › peer-review

4 Scopus citations

1998

Evaluation of glove liners with objective, subjective and performance measures

Chen, S. C., Tarawneh, I., Goodwin, B. & Bishu, R. R., 1998, In: Proceedings of the Human Factors and Ergonomics Society. 2, p. 846-850 5 p.

Research output: Contribution to journal › Conference article › peer-review

5 Scopus citations

Thermal properties of honeycomb panels - analysis of transient experiments with one-dimensional models

Cole, K. D., 1998, In: American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD. 361-5, p. 83-93 11 p.

Research output: Contribution to journal › Conference article › peer-review

Visual inspection of circuit boards: Effect of gender, age, defect type, and defect proportion

Klamklay, J. & Bishu, R. R., 1998, In: Proceedings of the Human Factors and Ergonomics Society. 2, p. 1161-1164 4 p.

Research output: Contribution to journal › Conference article › peer-review

2 Scopus citations

1997

Evaluation of gloves: Short time test vs. long time tests

Bishu, R. R. & Goodwin, B., 1997, In: Proceedings of the Human Factors and Ergonomics Society. 1, p. 692-696 5 p.

Research output: Contribution to journal › Conference article › peer-review

4 Scopus citations

Operator mental models in contemporary manufacturing: A study of electrodischarge machining control

Batra, S. & Bishu, R. R., 1997, In: Proceedings of the Human Factors and Ergonomics Society. 1, p. 220-224 5 p.

Research output: Contribution to journal › Conference article › peer-review

Mechanical & Materials Engineering

Research output

Search results