Michael P Sealy, PhD

  • 431 Citations
  • 11 h-Index
20082020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

2008

Laser direct-write micro dents using laser shock peening: Experimental study and numerical simulations

Sealy, M. P., Guo, Y. B., Dumitrescu, C., Puzinauskas, P. V. & Chen, S. C., Dec 1 2008, 2008 Proceedings of the ASME - 2nd International Conference on Integration and Commercialization of Micro and Nanosystems, MicroNano 2008. p. 635-639 5 p. (2008 Proceedings of the ASME - 2nd International Conference on Integration and Commercialization of Micro and Nanosystems, MicroNano 2008).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2009

Fabrication and characterization of micro dent array produced by laser shock peening on aluminum surfaces

Caslaru, R., Sealy, M. P., Guo, Y. B. & Chen, S. C., Nov 23 2009, Transactions of the North American Manufacturing Research Institution of SME - 37th Annual North American Manufacturing Research Conference, NAMRC 37. p. 159-166 8 p. (Transactions of the North American Manufacturing Research Institution of SME; vol. 37).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

26 Scopus citations

Fabrication and characterization of micro dent arrays by laser shock peening on Ti-6AL-4V surfaces

Caslaru, R., Guo, Y. B. & Sealy, M. P., Dec 1 2009, Proceedings of the ASME International Manufacturing Science and Engineering Conference 2009, MSEC2009. p. 841-844 4 p. (Proceedings of the ASME International Manufacturing Science and Engineering Conference 2009, MSEC2009; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fabrication and finite element analysis of micro dents using μ-laser shock peening

Sealy, M. P., Guo, Y. B. & Horstemeyer, M. F., Dec 1 2009, Proceedings of the ASME International Manufacturing Science and Engineering Conference, MSEC2008. p. 237-244 8 p. (Proceedings of the ASME International Manufacturing Science and Engineering Conference, MSEC2008; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

11 Scopus citations

Fabrication and finite element simulation of sequential laser shock peening of biodegradable Mg-Ca implants

Sealy, M. P., Guo, Y. B., Salahshoor, M. & Caslaru, R., Dec 1 2009, Proceedings of the ASME International Manufacturing Science and Engineering Conference 2009, MSEC2009. p. 1-8 8 p. (Proceedings of the ASME International Manufacturing Science and Engineering Conference 2009, MSEC2009; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2010

Characterization and modification of surface topography by sequential laser peening biodegradable magnesium-calcium alloy

Sealy, M. P., Guo, A. & Guo, Y. B., Dec 1 2010, ASME 2010 5th Frontiers in Biomedical Devices Conference and Exhibition, BIOMED 2010. p. 99-100 2 p. (ASME 2010 5th Frontiers in Biomedical Devices Conference and Exhibition, BIOMED 2010).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

63 Scopus citations
2011
11 Scopus citations
2012

Significant improvement of corrosion resistance of biodegradable metallic implants processed by laser shock peening

Guo, Y., Sealy, M. P. & Guo, C., Apr 24 2012, In : CIRP Annals - Manufacturing Technology. 61, 1, p. 583-586 4 p.

Research output: Contribution to journalArticle

47 Scopus citations
2014

A predictive model and validation of laser cutting of nitinol with a novel moving volumetric pulsed heat flux

Fu, C. H., Guo, Y. B. & Sealy, M. P., Dec 2014, In : Journal of Materials Processing Technology. 214, 12, p. 2926-2934 9 p.

Research output: Contribution to journalArticle

6 Scopus citations

Austenite-martensite phase transformation of biomedical Nitinol by ball burnishing

Fu, C. H., Sealy, M. P., Guo, Y. B. & Wei, X. T., Dec 2014, In : Journal of Materials Processing Technology. 214, 12, p. 3122-3130 9 p.

Research output: Contribution to journalArticle

14 Scopus citations
4 Scopus citations
2015

Energy Consumption Characteristics in Finish Hard Milling of Tool Steels

Liu, Z. Y., Sealy, M. P., Guo, Y. B. & Liu, Z. Q., Jan 1 2015, In : Procedia Manufacturing. 1, p. 477-486 10 p.

Research output: Contribution to journalConference article

6 Scopus citations

Finite Element Analysis of Machining Damage in Single-Grit Grinding of Ceramic Knee Implants

Sun, D. W., Sealy, M. P., Liu, Z. Y., Fu, C. H., Guo, Y. B., Fang, F. Z. & Zhang, B., Jan 1 2015, In : Procedia Manufacturing. 1, p. 644-654 11 p.

Research output: Contribution to journalConference article

8 Scopus citations

Finite element simulation and experimental validation of pulsed laser cutting of nitinol

Fu, C. H., Sealy, M. P., Guo, Y. B. & Wei, X. T., Jan 1 2015, In : Journal of Manufacturing Processes. 19, p. 81-86 6 p.

Research output: Contribution to journalArticle

16 Scopus citations

State-Of-Art, Challenges, and Outlook on Manufacturing of Cooling Holes for Turbine Blades

Li, Z. Y., Wei, X. T., Guo, Y. B. & Sealy, M. P., Jul 3 2015, In : Machining Science and Technology. 19, 3, p. 361-399 39 p.

Research output: Contribution to journalReview article

19 Scopus citations
2016

Energy based process signature for surface integrity in hard milling

Sealy, M. P., Liu, Z. Y., Guo, Y. B. & Liu, Z. Q., Dec 1 2016, In : Journal of Materials Processing Technology. 238, p. 284-289 6 p.

Research output: Contribution to journalArticle

15 Scopus citations

Energy consumption and modeling in precision hard milling

Sealy, M. P., Liu, Z. Y., Zhang, D., Guo, Y. B. & Liu, Z. Q., Nov 1 2016, In : Journal of Cleaner Production. 135, p. 1591-1601 11 p.

Research output: Contribution to journalArticle

26 Scopus citations

Energy consumption and process sustainability of hard milling with tool wear progression

Liu, Z. Y., Guo, Y. B., Sealy, M. P. & Liu, Z. Q., Mar 1 2016, In : Journal of Materials Processing Technology. 229, p. 305-312 8 p.

Research output: Contribution to journalArticle

51 Scopus citations

Fatigue performance of biodegradable magnesium-calcium alloy processed by laser shock peening for orthopedic implants

Sealy, M. P., Guo, Y. B., Caslaru, R. C., Sharkins, J. & Feldman, D., Jan 2016, In : International Journal of Fatigue. 82, p. 428-436 9 p.

Research output: Contribution to journalArticle

35 Scopus citations

Finite element modeling of hybrid additive manufacturing by laser shock peening

Sealy, M. P., Madireddy, G., Li, C. & Guo, Y. B., Jan 1 2016, p. 306-316. 11 p.

Research output: Contribution to conferencePaper

8 Scopus citations

Pulsed Laser Cutting of Magnesium-Calcium for Biodegradable Stents

Sealy, M. P., Guo, Y. B., Liu, J. F. & Li, C., Jan 1 2016, In : Procedia CIRP. 42, p. 67-72 6 p.

Research output: Contribution to journalConference article

8 Scopus citations

Real-time monitoring and prognosis of energy consumption in hard milling

Liu, Z. Y., Sealy, M. P., Guo, Y. B. & Liu, Z. Q., Dec 16 2016, International Symposium on Flexible Automation, ISFA 2016. Institute of Electrical and Electronics Engineers Inc., p. 422-427 6 p. 7790200. (International Symposium on Flexible Automation, ISFA 2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2017

Applications of laser-based additive manufacturing

Khoda, B., Benny, T., Rao, P. K., Sealy, M. P. & Zhou, C., Aug 9 2017, Laser-Based Additive Manufacturing of Metal Parts: Modeling, Optimization, and Control of Mechanical Properties. Taylor and Francis, p. 239-284 46 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

3 Scopus citations

Benchmark Burnishing with Almen Strip for Surface Integrity

Liu, Z. Y., Fu, C. H., Sealy, M. P., Zhao, Y. & Guo, Y. B., Jan 1 2017, In : Procedia Manufacturing. 10, p. 456-466 11 p.

Research output: Contribution to journalArticle

3 Scopus citations

Prediction and analysis of residual stress and deflections of Almen strip by burnishing

Liu, Z. Y., Fu, C. H., Sealy, M. P. & Guo, Y. B., Jun 1 2017, In : Production Engineering. 11, 3, p. 265-274 10 p.

Research output: Contribution to journalArticle

1 Scopus citations
2018

A review of computational modeling in powder-based additive manufacturing for metallic part qualification

Liu, J., Jalalahmadi, B., Guo, Y. B., Sealy, M. P. & Bolander, N., Nov 12 2018, In : Rapid Prototyping Journal. 24, 8, p. 1245-1264 20 p.

Research output: Contribution to journalReview article

3 Scopus citations

Energy consumption characteristics in finish hard milling

Liu, Z. Y., Sealy, M. P., Li, W., Zhang, D., Fang, X. Y., Guo, Y. B. & Liu, Z. Q., Oct 2018, In : Journal of Manufacturing Processes. 35, p. 500-507 8 p.

Research output: Contribution to journalArticle

4 Scopus citations

Hybrid processes in additive manufacturing

Sealy, M. P., Madireddy, G., Williams, R. E., Rao, P. & Toursangsaraki, M., Jun 1 2018, In : Journal of Manufacturing Science and Engineering, Transactions of the ASME. 140, 6, 060801.

Research output: Contribution to journalReview article

22 Scopus citations

Mechanical characterizations of 3D-printed PLLA/steel particle composites

Mozafari, H., Dong, P., Hadidi, H., Sealy, M. P. & Gu, L., Jan 1 2018, In : Materials. 12, 1, 1.

Research output: Contribution to journalArticle

Open Access
2 Scopus citations

Stochastic modeling and analysis of spindle energy consumption during hard milling with a focus on tool wear

Wang, X., Williams, R. E., Sealy, M. P., Rao, P. & Guo, Y., Jan 1 2018, Manufacturing Equipment and Systems. American Society of Mechanical Engineers (ASME), (ASME 2018 13th International Manufacturing Science and Engineering Conference, MSEC 2018; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Scopus citations

Stochastic modeling and analysis of spindle power during hard milling with a focus on tool wear

Wang, X., Williams, R. E., Sealy, M. P., Rao, P. K. & Guo, Y., Nov 1 2018, In : Journal of Manufacturing Science and Engineering, Transactions of the ASME. 140, 11, 111011.

Research output: Contribution to journalArticle

3 Scopus citations
2019

Glocal integrity in 420 stainless steel by asynchronous laser processing

Sealy, M. P., Hadidi, H., Kanger, C. J., Yan, X. L., Cui, B. & McGeough, J. A., 2019, In : CIRP Annals. 68, 1, p. 189-192 4 p.

Research output: Contribution to journalArticle

3 Scopus citations

Low velocity impact of ABS after shot peening predefined layers during additive manufacturing

Hadidi, H., Mailand, B., Sundermann, T., Johnson, E., Madireddy, G., Negahban, M., Delbreilh, L. & Sealy, M., Jan 1 2019, In : Procedia Manufacturing. 34, p. 594-602 9 p.

Research output: Contribution to journalConference article

Open Access
1 Scopus citations
Open Access
3 Scopus citations
2020

Additive manufacturing of magnesium alloys

Karunakaran, R., Ortgies, S., Tamayol, A., Bobaru, F. & Sealy, M. P., Mar 2020, In : Bioactive Materials. 5, 1, p. 44-54 11 p.

Research output: Contribution to journalReview article

Open Access
2 Scopus citations

Challenges in path planning of high energy density beams for additive manufacturing

Karunakaran, K. P., Negi, S., Nambolan, A., Patel, A., Patil, Y., Pandya, M., Kapil, S., Trushnikov, D., Sealy, M. & Bernard, A., Feb 1 2020, In : IOP Conference Series: Materials Science and Engineering. 759, 1, 012012.

Research output: Contribution to journalConference article

Open Access

Compressive behavior of 420 stainless steel after asynchronous laser processing

Sealy, M. P., Hadidi, H., Sotelo, L. D., Li, W. L., Turner, J. A. & McGeough, J. A., Jan 1 2020, (Accepted/In press) In : CIRP Annals.

Research output: Contribution to journalArticle

Effect of process parameters and shot peening on mechanical behavior of ABS parts manufactured by fused filament fabrication (FFF)

Kanger, C., Hadidi, H., Akula, S., Sandman, C., Quint, J., Alsunni, M., Underwood, R., Slafter, C., Sonderup, J., Spilinek, M., Casias, J., Rao, P. & Sealy, M. P., Jan 1 2020, p. 444-458. 15 p.

Research output: Contribution to conferencePaper

3 Scopus citations

Effect of Process Parameters and Shot Peening on the Tensile Strength and Deflection of Polymer Parts Made using Mask Image Projection Stereolithography (MIP-SLA)

Madireddy, G., Montazeri, M., Curtis, E., Berger, J., Underwood, N., Khayari, Y., Marth, B., Smith, B., Christy, S., Krueger, K., Sealy, M. P. & Rao, P., Jan 1 2020, p. 1761-1770. 10 p.

Research output: Contribution to conferencePaper

1 Scopus citations

Low velocity impact of hybrid stacked steel plates

Hadidi, H., Feng, R. Q. & Sealy, M. P., Jun 2020, In : International Journal of Impact Engineering. 140, 103556.

Research output: Contribution to journalArticle