Measurement and CFD simulation of the temperature stratification in an atrium using a floor level air supply method

Josephine Lau, J. L. Niu

Research output: Contribution to journalArticle

29 Scopus citations

Abstract

A glazed atrium is a common feature in shopping centres and in the lobbies of residential and commercial buildings. This research aimed to discover the vertical temperature distribution and cooling load reduction relating to displacement ventilation in atrium spaces. The air temperatures at different levels (0.1, 0.7, 1.2, 1.7, 3, 5 and 7 m), within a 25 m high exhibition atrium, were monitored. Using the measured surface temperatures as boundary conditions, three-dimensional computational fluid dynamic (CFD) simulations were performed to examine the vertical temperature distribution. Further, by using parametric studies, the influences of occupant load, equipment load, lighting load, floor and wall surface temperatures, and supply air conditions were investigated with 12 CFD simulation cases. Based on the simulation results, load reduction factors - with three grouping methods of heat sources - were then developed. Temperature stratification was present even under the condition of a low cooling load. Load reductions were lower for occupant and equipment loads than for a lighting load. The best grouping method was to consider the heat released from the floor as an individual group of heat sources, which is an indication that secondary heat from the floor should not be neglected during the design of displacement ventilation.

Original languageEnglish (US)
Pages (from-to)265-280
Number of pages16
JournalIndoor and Built Environment
Volume12
Issue number4
DOIs
StatePublished - Aug 2003

Keywords

  • Atrium
  • Computational fluid dynamics
  • Displacement ventilation
  • Load reduction factor
  • Thermal stratification

ASJC Scopus subject areas

  • Public Health, Environmental and Occupational Health

Fingerprint Dive into the research topics of 'Measurement and CFD simulation of the temperature stratification in an atrium using a floor level air supply method'. Together they form a unique fingerprint.

  • Cite this