Miniaturized thin soft surface structure using metallic strips with ledge edges

S. Abushamleh, H. Al-Rizzo, Ahmed A. Kishk, H. Khaleel

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Thin soft surface of strips with ledge edges are used to reduce the strip period width and in turns a miniaturized structure is achieved. Numerical analyses are presented. A 20% relative bandwidth is achieved whereas a 10% bandwidth was achieved by using the conventional planar soft surface structure. The effect of via position was also studied in the proposed structure.

Original languageEnglish (US)
Title of host publication2013 IEEE Antennas and Propagation Society International Symposium, APSURSI 2013 - Proceedings
Pages310-311
Number of pages2
DOIs
StatePublished - 2013
Event2013 IEEE Antennas and Propagation Society International Symposium, APSURSI 2013 - Orlando, FL, United States
Duration: Jul 7 2013Jul 13 2013

Publication series

NameIEEE Antennas and Propagation Society, AP-S International Symposium (Digest)
ISSN (Print)1522-3965

Conference

Conference2013 IEEE Antennas and Propagation Society International Symposium, APSURSI 2013
CountryUnited States
CityOrlando, FL
Period7/7/137/13/13

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'Miniaturized thin soft surface structure using metallic strips with ledge edges'. Together they form a unique fingerprint.

  • Cite this

    Abushamleh, S., Al-Rizzo, H., Kishk, A. A., & Khaleel, H. (2013). Miniaturized thin soft surface structure using metallic strips with ledge edges. In 2013 IEEE Antennas and Propagation Society International Symposium, APSURSI 2013 - Proceedings (pp. 310-311). [6710816] (IEEE Antennas and Propagation Society, AP-S International Symposium (Digest)). https://doi.org/10.1109/APS.2013.6710816