Pulsed laser deposition of AlN thin films

Y. F. Lu, Z. M. Ren, H. Q. Ni, Y. W. Goh, B. A. Cheong, S. K. Chow, J. P. Wang, T. C. Chong

Research output: Contribution to journalConference article

1 Scopus citations

Abstract

Aluminum nitride (c-AlN) thin films were deposited at room temperature on silicon substrates by nitrogen-ion-assisted pulsed laser ablation of a hexagonal AlN target. A KrF excimer laser with pulse duration of 23 ns and wavelength of 248 nm was used as a laser source for the ablation. A nitrogen ion beam with energy in the range from 200 to 800 eV is used to co-process the deposition. With this technology, it's possible to independently control the energy of the AlN radicals in the ablated plasma and the nitrogen ions in the ion beam to improve the quality of the deposited thin films. Moreover, the nitrogen ion implantation can also compensate the loss of nitrogen species in the ablation process. X-ray diffraction (XRD), Raman spectrum and X-ray photoelectron spectroscopy (XPS) were used to characterize the deposited thin films. The deposited thin films exhibit good crystal properties with sharp XRD peaks. The influences of the nitrogen ion beam energy on the electronic and structural properties of the deposited thin films were studied. The nitrogen ions can effectively promote the formation of stable Al-N bonds and improve the crystal properties of the deposited thin films. A nitrogen ion energy of 400 eV is proposed.

Original languageEnglish (US)
Pages (from-to)182-189
Number of pages8
JournalProceedings of SPIE - The International Society for Optical Engineering
Volume3933
DOIs
StatePublished - 2000
EventLaser Applications in Microelectronic and Optoelectronic Manufacturing V - San Jose, CA, USA
Duration: Jan 24 2000Jan 26 2000

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Computer Science Applications
  • Applied Mathematics
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'Pulsed laser deposition of AlN thin films'. Together they form a unique fingerprint.

  • Cite this

    Lu, Y. F., Ren, Z. M., Ni, H. Q., Goh, Y. W., Cheong, B. A., Chow, S. K., Wang, J. P., & Chong, T. C. (2000). Pulsed laser deposition of AlN thin films. Proceedings of SPIE - The International Society for Optical Engineering, 3933, 182-189. https://doi.org/10.1117/12.387554